A Newbie's Guide to Safely Towing an RV (or Just About Anything)

More Americans are heading outdoors now than ever. For some, that means disappearing far, far off-grid into the backcountry. Others prefer “roughing it” in a proper RV with all the comforts of home. If you’re in the latter camp and you happen to be a first-time buyer of an RV trailer and new to RV’ing, you might also be new to towing. The idea of hooking up a multi-ton rig to your car, truck, or SUV, then barreling down the interstate at 65 miles per hour, can be intimidating. But it doesn’t have to be.

We chatted with Mike Betts, Test Operations Supervisor at the Nissan Proving Ground. He’s a passionate RV’er and, thanks to his daily work, happens to know a thing or two about safe towing. He shared a few practical tips, along with the basic terms and acronyms, every RV owner needs to know before they tow.

Before getting started, your tow vehicle must be equipped with a few essentials:

Above all else, weight — or weights — is the first thing to get right when towing. But, not all weights are created equal. According to Betts, the six key weight figures to understand are:

With an understanding of the various weights involved in towing, the next step is determining your vehicle’s towing capacity. The exact figure can be found in every vehicle’s owner manual, or by running a quick Google search. The lightest, most compact travel trailers can be towed with a sedan or small SUV. Something heavier, like most Airstreams, requires a larger SUV or even a full-sized pickup. Something like the 2020 Nissan Titan XD, for example, can tow up to 11,000 pounds, which is more than enough for almost any travel trailer on the market.

Next, your vehicle needs to be equipped with the right tow hitch. Every hitch’s capability boils down to its strength and maximum weight capacity (i.e., how heavy of a trailer it can support). Betts breaks down the four classes of ball-type hitches:

Once you’ve determined the right class of tow hitch, it’s simply a matter of choosing the one that physically fits your tow vehicle’s hitch receiver. Common things to keep in mind include the hitch ball size, the width of the hitch receiver, and the amount of rise or drop required to ensure your tow setup is as level as possible. “Ball size is determined by the size of the receiver of the trailer. The ball/receiver size is marked on top of the coupler latch on the trailer tongue,” says Betts. ETrailer.com is a great resource to confirm whether your specific vehicle-trailer setup will be compatible.

“For heavier trailers,” he continues, “you should consider the use of a weight-distribution hitch, which will transfer weight to the front axle of the towing vehicle. Ideally, when setting up a vehicle for towing, the front axle should weigh the same before and after the trailer is attached. This is accomplished with the weight distribution hitch.” One hack to determine this without a scale is to measure the height of the front wheel well before and after attaching the trailer. To maximize safety, you want that number to stay the same. The more balanced and level your vehicle-trailer setup, the safer it will be overall.

With your tow vehicle and RV or trailer safely hitched up, the only thing left to do is drive. There’s no substitute for real-world experience. Betts recommends finding “a friend who is an experienced tower and find an empty parking lot to practice in. Spend as much time as you can in a controlled, safe environment learning the ins and outs of your vehicle before heading out. Like anything else, the more practice and research you can do, the better!” It’s sure to be frustrating at times, especially when you discover first-hand how maddeningly difficult backing up a trailer can be! But, with plenty of practice, you’ll find it’s not as hard or intimidating as it looks.